Automatic loading and unloading
Flat Lamination High-Gloss MDF Production Line
Flat-laminate MDF, particleboard, foamed PVC and metal panels with PET, PVC, HPL or natural veneer. Adhesive preparation, overlay feeding and roller pressing are coordinated around the materials and required finish.
Production route
Bond the overlay and panel in one coordinated route
The panel enters and passes through preheating and adhesive application. The overlay is fed into the roller press, followed by edge trimming, panel turning and unloading as configured. Adhesive choice and press settings depend on the substrate and overlay combination.
Equipment selection begins with the panel and overlay materials. Adhesive type, panel dimensions and required automation guide preheating, gluing, pressing and edge-trimming choices.
- Base panel
- MDF, particleboard, foamed PVC or metal
- Overlay
- PET, PVC, HPL or natural veneer
- Adhesive system
- PUR or EVA suited to the bond
- Panel dimensions
- Required product size and thickness
- Automation level
- Manual, semi-automatic or automatic
- Production plan
- Material mix and required output
Line equipment
Equipment along the production route
Equipment selection and sequence are coordinated with the product and project configuration.
Roller conveyor
Preheating machine
PUR adhesive melting machine
Roller gluing machine
Sheet-overlay feeding machine
Roller press
Automatic edge-cutting machine
Board-turning machine
Applications
Products and applications
Line configuration
Lamination matched to your material combination
- Manual, semi-automatic or fully automatic handling
- PUR or EVA adhesive selection for the bond
- Press pressure and speed adjusted to the product
- Overlay feeding coordinated with panel dimensions
- Edge trimming and panel handling matched to the route
- Arrangement planned around the project expansion requirements
Before selecting the line
Answers about materials, adhesives and overlay-bonding equipment.
Which substrates and overlays are considered for this line?
MDF, particleboard, foamed PVC and metal panels are within the line scope, with PET, PVC, HPL and natural overlays described for the product. Each substrate and overlay combination requires its own adhesive and bonding-condition review.
How are PUR and EVA adhesives selected?
Adhesive choice depends on the substrate, overlay and required finished surface. Adhesive preparation and application equipment must suit the selected system; a PUR melting unit does not make every adhesive configuration identical.
Why are preheating, pressing and edge trimming reviewed together?
These operations work within one bonding route, and each depends on the materials and panel movement. Overlay feeding, press pressure and edge trimming are reviewed together when planning the product route.
Is daily output the same for every project?
Output depends on panel dimensions, overlay and adhesive type, finishing operations and loading method. A project estimate needs the production plan and product mix; one fixed number does not describe every configuration.
Discuss your project
Share your product material combination
Send the substrate, overlay, adhesive and production-plan details to discuss the lamination route for your project.
+98 21 8855 4040info@novinline.com