Debarker
Raw MDF Production Line (Multi Opening Press)
Design and supply of raw MDF lines with a multi-opening press, from fibre preparation to mat forming and pressing, configured for your board thickness, density and production plan.
- MaterialWood
- ProductRaw MDF
- ProcessMulti-opening press
- ScopeSupply and commissioning
Production process
From prepared fibre to raw MDF board
Wood fibre is prepared, refined, dried and blended with resin before a forming machine makes the fibre mat. The multi-opening press consolidates that mat under controlled heat and pressure. Board dimensions, thickness, density, target capacity and the number of press openings define the configuration.
Width, thickness and capacity ranges are stated design options. The final configuration and achievable capacity are confirmed after reviewing feedstock, density, the production plan and plant conditions.
- Working width
- Options: 1,830 / 2,070 / 2,300 mm
- Board thickness
- Stated design range: 8–32 mm
- Design capacity
- Stated range: 600–1,300 m³/day
- Target density
- Matched to the board application
- Press openings
- Matched to the production plan
- Wood feedstock
- Available wood species and feedstock properties
Main systems
Equipment for your product
Line sections are selected and coordinated for the product, capacity and plant conditions.
Chipper
Chip screening
Chip washer
Chip storage
Digester
Refiner
Blowline gluing
Fibre dryer
Forming machine
Multi-opening press
Cooling system
Product applications
Where the finished product is used
Configuration options
A line matched to your plant
- Multi-opening press sized for the project
- Working width options of 1,830, 2,070 or 2,300 mm
- Design thickness range of 8–32 mm
- Density matched to the finished product
- Custom design for feedstock and target capacity
Frequently asked questions
Answers to help select a configuration and prepare your project information.
What does the multi-opening press do in this line?
The press consolidates the formed fibre mat into raw MDF board using controlled heat and pressure. Its number of openings and configuration are selected for the board dimensions and production plan.
Which widths and thicknesses are stated for design?
Working widths of 1,830, 2,070 and 2,300 mm and a thickness range of 8–32 mm are stated design options. The final selection depends on the product, feedstock and project conditions.
Does every configuration have the same capacity?
No. The stated design range is 600–1,300 m³/day, while the final capacity depends on thickness, density, feedstock and the production schedule and is confirmed in the project technical proposal.
What should we provide for a technical proposal?
Share board dimensions and thickness, target density, daily capacity, wood feedstock and plant layout information. These inputs define the press configuration and the supply scope for your project.
Technical consultation
Let’s review the right configuration for your project
Share the product specification, target capacity and plant conditions so we can review the supply and commissioning scope.
+98 21 8855 4040info@novinline.com