Dust cleaning machine
Printing MDF 3mm Production Line
Decorative printing and UV coating on thin MDF for printed 3mm panels. Surface preparation, colour layers and the final coating are coordinated around the core, design and required finish.
PRODUCTION PROCESS
From thin MDF to printed panels
Raw thin MDF is cleaned, coloured and decoratively printed before receiving its final UV coating. Finished thickness comes from the core together with the coating layers; woodgrain, stone and decorative colour designs are reviewed for the product.
Product specifications, materials and factory conditions guide the equipment and line-layout review.
- MDF core dimensions and thickness
- Core thickness and required finished thickness
- Decorative design and colour
- Woodgrain, stone or custom design sample
- Colour layers and UV coating
- Material types and surface-layer sequence
- Target surface finish
- Reference sample for the finished appearance
- Target capacity
- Order volume and production schedule
- Line space and panel handling
- Plant dimensions and thin-panel feeding method
LINE SYSTEMS
Equipment along the process
Each unit has a role along the process; final equipment selection and arrangement are coordinated with the project requirements.
Single-roller UV coater
Double-roller UV coater
Air-jet dryer
Three-lamp UV dryer
Roller conveyor
PRODUCT APPLICATIONS
Where the product is used
PROJECT CONFIGURATION
A line arranged around the product
- Core thickness selected for a nominal 3mm finished panel
- Colour, print and final UV-coating layer sequence
- Air-jet and UV drying matched to the surface materials
- Thin-MDF handling and line layout matched to the plant
Before selecting the line
Answers about the process, materials and project configuration.
What core is used for printed 3mm MDF?
In the described process, a raw MDF core approximately 2.6–2.7mm thick reaches approximately 3mm after colouring and coating. Core selection and coating-layer thicknesses should be reviewed against the target product.
Which designs can be considered for MDF?
Woodgrain, stone, decorative colours and custom patterns are within the described product scope. The design and colour sample, printing materials and expected finish guide the process and equipment review.
Where does the UV coating fit in the process?
The UV coating is applied and cured as the final surface layer after colouring and decoration. Coating material, layer order and drying conditions must work together; finished surface properties are assessed with a product sample.
What should we send for a line proposal?
Send core dimensions and thickness, finished thickness, design and colour samples, coating materials, target capacity and plant space. These inputs are needed to select coating, drying and panel-transfer stations.
PROJECT CONSULTATION
The right line for your project
Share your product specification and factory conditions so that the equipment, layout and implementation scope can be reviewed.
+98 21 8855 4040info@novinline.com