Wood debarker
Raw MDF Production Line (Continuous Press)
Raw MDF production from wood and chip preparation through fibre refining, resin application, drying, mat forming and continuous pressing. Width, thickness, density and target capacity guide the line-layout review.
PRODUCTION PROCESS
From wood chips to raw MDF board
Wood is converted into chips and prepared for fibre production. After resin application and drying, fibres are formed into a mat and enter the continuous press. Cooling and cutting complete the board-production route; line settings depend on the raw material and product specification.
Product specifications, materials and factory conditions guide the equipment and line-layout review.
- Board width and dimensions
- Effective width and finished product dimensions
- Target thickness and density
- Required MDF thickness and density
- Wood and raw materials
- Wood specification and chip supply conditions
- Resin and process conditions
- Resin type and fibre-production requirements
- Target capacity and schedule
- Production volume for the product and line configuration
- Plant, utilities and storage
- Layout, utilities and material and board space
LINE SYSTEMS
Equipment along the process
Each unit has a role along the process; final equipment selection and arrangement are coordinated with the project requirements.
Wood chipper
Chip screening
Chip washing unit
Chip storage silo
Digester and thermal conditioning
Fibre refiner
Blowline resin application
Fibre dryer
Fibre-mat forming station
Continuous MDF press
Board cooling system
PRODUCT APPLICATIONS
Where the product is used
PROJECT CONFIGURATION
A line arranged around the product
- Described effective-width options: 1,830, 2,070 and 2,300 mm
- Described thickness range: 8–32 mm; selection depends on the product
- Refining, resin application and drying arranged for the raw material
- Continuous pressing matched to target width, thickness and density
- Final capacity depends on the product, press speed and equipment configuration
Before selecting the line
Answers about the process, materials and project configuration.
What are the main continuous-press MDF stages?
The production route includes wood and chip preparation, storage and thermal conditioning, fibre refining, resin application and drying, mat forming and continuous pressing. After pressing, the board is cooled and cut to the required dimensions.
Which width and thickness options are described?
The described configuration lists effective widths of 1,830, 2,070 and 2,300 mm and a thickness range of 8–32 mm. The final selection is reviewed against the product, density, raw material and equipment arrangement and defined in the technical proposal.
How is production capacity determined?
Capacity depends on line width, board thickness and density, press speed and equipment configuration. Target capacity and the production schedule should be supplied with the product specification so that proposed capacity can be assessed for that project.
What information is needed for an MDF plant proposal?
Send board width and dimensions, target thickness and density, wood and chip specifications, resin type, target capacity, operating schedule and plant and utility information. These inputs guide the review of preparation, fibre production, pressing and board handling.
PROJECT CONSULTATION
The right line for your project
Share your product specification and factory conditions so that the equipment, layout and implementation scope can be reviewed.
+98 21 8855 4040info@novinline.com