Material-mixing machine
Marble Sheet Production Line
Produce decorative PVC sheets with a natural-stone appearance from a polymer and mineral-powder blend. Mixing, extrusion, roller forming, lamination and cutting are coordinated around the surface design and product dimensions.
Production route
From material blending to a stone-design sheet
Polymer materials and mineral powder are prepared and supplied to the extruder. The sheet passes through roller forming and cooling, with lamination, embossing or UV coating selected for the required surface. Cutting and collection complete the sheet-production route.
Raw materials, sheet dimensions and finished appearance guide extruder and surface-equipment selection. The production plan and intended product use also inform the configuration.
- Material blend
- PVC, mineral powder and project additives
- Sheet dimensions
- Product width, length and thickness
- Surface design
- Stone, wood or custom-colour design
- Surface finish
- Lamination, embossing or UV coating
- Product application
- Required wall or interior covering
- Production plan
- Design mix and required output
Line equipment
Equipment along the production route
Equipment selection and sequence are coordinated with the product and project configuration.
Automatic material-transfer system
Extruder
Roller press
Sheet-cooling system
Lamination machine
Embossing machine
UV-coating machine
Sheet haul-off system
Cutting machine
Automatic sheet-handling machine
Collection and packing system
Applications
Products and applications
Line configuration
Choose surface operations for the product design
- Extruder selection for the project material blend
- Sheet dimensions and forming-settings selection
- Lamination for the chosen decorative overlay
- Embossing or UV coating where required
- Cutting and handling for finished dimensions
- PLC control and arrangement matched to the production plan
Before selecting the line
Questions about sheet materials, surface appearance and finishing operations.
What materials are used for this marble sheet?
The product is a decorative PVC sheet made from polymer materials and mineral powder, with a natural-stone appearance. The material blend and project additives should be reviewed together with thickness and intended use when selecting equipment.
Does every product need lamination, embossing and UV coating?
These machines serve different surface-finishing operations. Their selection and sequence depend on the decorative design, overlay and required finish; showing the equipment does not mean every product uses all operations together.
How is use in a wet space reviewed?
Wet spaces are among the described applications, but suitability must be assessed with the material blend, surface and installation details. Share the intended conditions and performance requirements at the start so the product and process can be selected accordingly.
Which sheet details are needed for line selection?
Define the width, length, thickness, material blend and required surface design. The production plan and sheet-collection method also inform extrusion, forming, cutting and handling equipment.
Discuss your project
Describe your sheet and surface design
Share the materials, sheet dimensions and required surface operations to discuss the marble-sheet production route.
+98 21 8855 4040info@novinline.com