Melamine-resin mixing machine
Paper Impregnation Production Line
Impregnate decorative paper with industrial resins for MDF, HDF, particleboard and laminate products. Resin preparation, web guidance, drying and moisture control are coordinated around the paper construction and final use.
Production route
From a paper roll to paper prepared for pressing
The paper roll enters the guidance route and receives melamine or the selected resin system. Thermal drying and moisture and temperature control prepare the paper for laminate and wood-panel production. One- or two-stage impregnation is reviewed according to the intended product.
Paper and resin specifications, the target product moisture and outfeed format guide impregnation and drying selection. The production plan and number of process stages also affect the arrangement.
- Input paper
- Decorative paper type and roll specification
- Resin system
- Required melamine or urea-formaldehyde system
- Impregnation stages
- One- or two-stage configuration
- Product condition
- Required paper resin content and moisture
- Outfeed format
- Roll or sheet format and required dimensions
- Use and production plan
- Laminate product and required output
Line equipment
Equipment along the production route
Equipment selection and sequence are coordinated with the product and project configuration.
Paper-roll unwinder
Paper-guidance system
Paper-splicing unit
Melamine-resin impregnation machine
Second impregnation stage
Paper-drying machine
Paper-cooling system
Roll-to-sheet cutting machine
Paper-collection and stacking system
Applications
Products and applications
Line configuration
Coordinate paper impregnation and drying
- One- or two-stage impregnation for the product
- Resin-system selection for the paper
- Paper resin-content and moisture control
- Drying and cooling coordinated with the route
- Cutting and collection for the outfeed format
- PLC control matched to the process configuration
Before selecting the line
Paper, resin and outfeed condition are defined before selecting the process stages.
Which products use the impregnated paper?
The decorative paper is intended for MDF, HDF, particleboard and laminate products. The end use, from cabinet panels to flooring, guides the paper, resin and required outfeed condition.
How is one- or two-stage impregnation selected?
The number of stages must suit the paper type, resin system and product specification. Both configurations are within the described scope, but a second stage is not mandatory for every project and is established during the product review.
Why are outfeed moisture and temperature controlled?
After resin application, paper passes through thermal drying and is prepared for later use. Moisture and temperature conditions must suit the product and subsequent pressing process; target conditions are defined in the project specification.
Which paper and resin specifications are needed for consultation?
Share the decorative-paper type, roll specification, resin system, outfeed format and end use. Target resin content and moisture and the production plan also help establish impregnation, drying and collection equipment.
Discuss your project
Discuss the paper-preparation route for your project
Describe the paper, resin and required outfeed condition to discuss the impregnation and drying stages.
+98 21 8855 4040info@novinline.com